News Center

Position: Home -> News Center > Industry News

High Pressure Inverted Bucket Steam Trap

Inverted Bucket Steam Trap works with the principle of density contrast  between condensate and steam. In the inverted bucket steam trap internal, the inverted bucket is connected to the lever system to open and close against the steam pressure. The inverted bucket opened downwards and acting as a level sensor. When the device start, Air and low temperature condensate enter into the pipe, At this moment, the steam trap is open completely and then the air and the condensate can be removed quickly, which can make the pipeline temperature increased. When the steam entered into the inverted bucket, the bucket will float up, which will drive the lever to close the steam trap. There's a small hole on the inverted bucket, which can remove the air automatically. When some steam is drained from the hole, the rest steam will become the condensate.Then the bucket will sink because of lack of float. Then the lever system connected to the bucket will open the valve and the steam will enter into the bucket. All this will work continuously and the water will be drained continuously when the system is on.

Hits:  UpdateTime:2014-03-05 08:10:12  【Printing】  【Close
Previous:No Information
Next:No Information
  • Copyright (c) 2008-2015 Yongjia Goole Valve Co,.Ltd http://www.chinavalveworld.com E-mail: goole4@goolevalve.com
  • Address: He_yi Industrial Zone, Oubei Town, Wenzhou City, Zhejiang Province, P. R. China TEL: 86 - 577 - 57781015 FAX : 86 - 577 - 67985602
  • safety relief valve(our hot), pressure reducing valve and other steam trap,bellow sealed globe valve,ball valve, Y/T/U strainer
Online 
Ms Cathy Ms Cathy MSNMs Cathy